Flowmeter Krohne TIDALFLUX 2300
Flow Meter Krohne

Flowmeter Krohne TIDALFLUX 2300

Posted On April 1, 2019 at 7:51 am by / No Comments

flowmeter Krohne , distributor jual produk flowmeter krohne yang tepat jika ingin beli flowmeter krohne murah dengan harga grosir, banyak pilihan, bergaransi & melayani pengiriman ke seluruh wilayah indonesia


  • With integrated capacitive level measurement for flow measurement of water and wastewater (≥10% pipe fill level)
  • Accurate (±1%) and cost-saving alternative to open channel systems
  • Flange: DN200…1600 / 8…64″
  • 3 x 4…20 mA, pulse, HART®, Modbus, PROFINET

The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up to DN1600 / 64”). The meter is the ideal solution for flow measurement of municipal or industrial wastewater in pressureless transport lines. However, the EMF is also suitable for measurement of effluent brine from dredging, mining or sea/well water injection applications. Unlike open channel systems (Venturi, V-notches etc.) the inline flowmeter is a closed measuring solution without obstructions and with a much better accuracy at lower total costs of ownership.

Product highlights

  • Bi-directional flow measurement over a wide dynamic range
  • Closed measurement solution with patented integrated non-contact level measurement
  • Designed for effluent and slurries in gravity pipelines / sewers
  • Chemically and abrasion resistant PUR liner
  • Accuracy: ±1% of measured value (MV)
  • Electrodes not in contact with floating deposits
  • Optional version for direct burial installation and flooded areas (IP68)
  • Standard factory calibration, no on-site calibration required
  • Extensive flowmeter and process diagnostics which exceed the NE 107 requirement
  • Also for use in hazardous areas zone 1
  • On-site verification of flowmeter with OPTICHECK service tool

Typical applications


  • Water and wastewater applications in partially filled and gravity feed pipes
  • Cost-effective replacement of expensive siphon tube constructions

Water and wastewater industry

  • Surface water
  • Biological and chemical wastewater
  • Combined and separate sewage systems
  • Combined sewer overflows (CSOs)
  • Storm water overflows (SWOs)
  • Rainwater retention basins
  • Influent/intake at wastewater treatment plants
  • Effluent of wastewater treatment plants
  • Discharge to surface water

Chemical and other process industries

  • Industrial wastewater collection and return flows
  • Control and monitoring of cooling water

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.

WhatsApp chat