Home Flow Meter Piusi Flow Meter Piusi k33

Flow Meter Piusi k33

Flow Meter PIUSI K33 – K44

Mechanical meters. Designed to measure the exact quantity of dispensed liquid (fuel or lubricant) for non commercial use. Reliable, economical and easy to install and calibrate on site. Also gravity functional thanks to reduced resistance to flow.

Mod. K33, 3 digit partial totals (max 999 litres), 6 digit totals.
Mod. K44, 4 digit partial totals (max 9999 litres), 7 digit totals.
Mod. Pulser: “Open collector” card type, frequency 10 pulses/litre, power supply 6-24 V DC, max 10 mA.

Category Flow Meter
Liquid Biodiesel, Diesel, Oil
Sector of application Fuel Transfer, Garage Equipment
Flow-rate up to 120 l/min
Accuracy +/- 1%


Flow Meter Piusi , distributor jual Flow Meter Piusi yang tepat. Tersedia Berbagai Tipe & Spesifikasi Produk Flow Meter Piusi Dengan Kualitas Asli & Terpercaya. Jika ingin beli Flow Meter Piusi murah dengan harga grosir, banyak pilihan, bergaransi & melayani pengiriman ke seluruh wilayah indonesia. Hubungi kami segera!!!

Flow Meter


The PIUSI K33 ATEX product is a mechanical flow meter suitable for the monitoring of diesel, gasoline and kerosene. For non-commercial use, K33 ATEX meets the ATEX requirements for precise measurement of the quantity of Gasoline, kerosene and diesel dispensed in environments with a high risk of explosion.

PIUSI K33 ATEX mechanical flow meter has a 3-digit partial indicator


The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel has been designed to ensure precise measurement of the amount of fuel dispensed. Easy to calibrate and install, the K33 ATEX flow meter can monitor the quantity of fuel dispensed for a maximum flow rate of 20-120 l/min and with a maximum working pressure of the pump of 3.5 bar. In addition, it can guarantee a burst pressure of 28 bar with a metering accuracy of +/- 1%.


The K33 ATEX mechanical flow meter for gasoline, kerosene and diesel is suitable for application to pumps or gasoline dispensers and is suitable for those who are looking for a simple and economic product, without particular need for control over the fleet of vehicles. K33 ATEX can be installed in any position on both rigid and flexible pipes, as well as directly on pumps or tanks.

K33 ATEX is a reliable mechanical flow meter that can also be used by gravity, thanks to its low resistance to flow.

K33 ATEX as an ATEX flow meter is included in group II, category 2 G IIB T=85°C (T6), and therefore it is suitable for working in areas classified as “1” and “2” according to directive 99/92/EC.


Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “Flow Meter Piusi k33”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *

WhatsApp chat