Uncategorized

SHM VORTEX-TP FLOW METERS DN250

Posted On November 25, 2022 at 3:16 am by / No Comments

SHM VORTEX-TP FLOW METERS DN250
SHM VORTEX-TP FLOW METERS DN250

TECHNICAL SPECIFICATIONS :

Size:DN250
Liquid Range:120-950 M3/H
Gas Range:970-5500 M3/H
Dimension:L = 115 MM
:D = 300 MM
:H = 540 MM
:CH = 600 MM

SHM Vortex-TP Flow Meters Size 10 Inch

SHM VORTEX-TP FLOW METERS DN250 : Digital Flow Meter with for gas, liquid and vapor, body, shedder and sensor all made from Stainless Steel SUS 316L. Converter housing made from epoxy coated aluminium capable in harsh process environment.

APPLICATION :

SHM Vortex-TP Flow Meter series is suitable for oil, chemical industry,metallurgy, heating power, spinnng, papermaking, etc. Measure over-heating/ saturation vapor,, compressed/ordinary air (oxigen, nitrogen, hydrogen, natural/ coal gas, etc), water and liquid (petrol, alcohol, benzene, etc)

FEATURES SHM VORTEX-TP FLOW METERS DN250 :

  • DN25-200 = 4.0Mpa, DN250-300 = 1.6Mpa
  • Medium temperature : -40-250°C, -40-320°C
  • Service voltage : sensor and transmitter : +12V DC, +24V, Battery supply feed : 3.6V battery.
  • Protection grade : IP 65, (req. IP 68)
  • Environment Condition : Temp. -20-55°C, relative humidity : 5-90%, ATM Pressure : 86-106 kPa.
  • Medium : Gas, Liquid, Steam
  • Signal Output : Analog 4-20mA, 0Hz-50kHz, 2 alarm outputs : high and low limit alarm communication : RS 485, RS 232, MODBUS, HART, PROFIBUS-DP
  • ISO 9001 and ISO 4064
  • Warranty 2 years (full service and spare part).

Tinggalkan Balasan

Alamat email Anda tidak akan dipublikasikan.

WhatsApp chat